5 Easy Ways to Remove and Prevent Bathroom Mold


Bathroom mold is something that most people have to deal with at some point in their lives. Whether you’re living in an apartment building or if your home has old water pipes, bathroom mold can start to grow anywhere there’s moisture and poor ventilation, which can make it hard to get rid of! In addition to being unsightly, bathroom mold can also cause respiratory issues which can produce mycotoxins that are harmful when inhaled. In this article, We are going to take you through 5 easy on how to ways to remove and prevent bathroom mold.

Check your ventilation

Ventilation is the key to avoiding bathroom mold. Make sure your fan is on at all times and that it points in the direction of the vent. Another good idea is to use a dehumidifier, which helps reduce moisture levels. You may also want to consider adding exhaust vents or air conditioners that are specially designed for bathrooms near potential sources of water leakage or condensation, such as bathtubs, sinks, or showers. They can remove moisture from the air and prevent bacteria buildup in your bathroom.

Get rid of standing water

Removing standing water is the most important step in preventing mold. A quick wipe of the sink with a paper towel, or wiping down any spills on the floor, is all it takes. This can help prevent 99% of bathroom molds from forming. The next step is wiping down any spills on the floor, which will take care of 99% of bathroom molds that could form without you even noticing. You may also want to try changing your shower curtain out every few months as mold loves moisture, too. Lastly, be sure to run your fan after showers and baths so the moisture doesn’t linger.

Use an anti-mold product

An anti-mold product will kill mold spores in an affected area. These products work quickly and effectively, but you’ll want to make sure that you’re using a product that is safe for use around your family, as some antimold products are toxic. Make sure to follow the directions carefully, as they may vary depending on the type of product you’re using. Read reviews online before purchasing any product to make sure it’s worth the investment.

Clean up dry areas first

Bathrooms are one of the areas in your home where water is often spilled. To make it easier to wipe up, those spills can be mopped up with paper towels or a rag. Before cleaning, turn off the lights so that you can see all the messes you need to clean up. Starting at the top and working your way down will prevent any drips from falling onto a wet surface. If there are any leaks or plumbing issues, contact a plumber for repairs. Some common signs of mold on bathroom walls include blue-green stains and fuzzy black spots. Removing the mold should start by locating the source of the water supply to stop its growth.

Repaint when needed

Repainting the bathroom is often seen as an easy way to fix any color imperfections in the space. In addition, repainting will also eliminate moisture from seeping into the cracks, eliminating mold growth. It is recommended that you paint at least once every three years. You can use a mildew-resistant primer when painting walls. The cost of a gallon of paint can range anywhere from $30 to $100. A gallon of primer ranges anywhere from $12-$35.


Create an environment in your bathroom that is not conducive to mold growth. There are a variety of steps you can take from installing a vent, using exhaust fans, repairing leaks, ventilation, and good housekeeping to do so. Wipe down surfaces, use anti-bacterial cleaners and avoid excess moisture in the room by avoiding carpeting or any other water-retaining materials.