Because of its durability, copper is the preferred material for most water supply lines. However, copper pipe can leak when dented, punctured, or weakened from corrosion. Joints can degrade too.
Even if you have galvanized or plastic supply pipe in your house, you may want to use a transition fitting and switch to copper when making a repair or extending a line. When joining copper pipe to steel pipe, be sure to use a dielectric fitting to avoid corrosion.
Type M copper pipe is fine for most residential work. Buy lead-free solder and flux paste.
Sweating a large copper drain line calls for a large propane torch; you're probably better off hiring a pro for such work.
Compression fittings require no special skills to install, but they are expensive. Use them only where they will be exposed; any joints hidden in a wall must be sweated.
Carlsbad PlumbingGeneral plumbing information including terms, tools and other basics. In this section you’ll find a wide range of plumbing information basics and do-it-yourself tips. Topics include plumbing tools, terms, safety guidelines, general tips and frequently asked questions.
Bathroom Sink Plumbing
Bathroom sink plumbing is made up of quite a few different parts that can break, leak, or become blocked. If you have to buy a part, look something up, or call a plumber it will be easier if you know the names of the plumbing pieces.
When you choose A.C Plumbing Construction, rest assured you're getting a high level of service at a great price. Here are nine reasons for you to call A.C Plumbing Construction today.
Water pipe maintenance should be part of your regular home maintenance.
If ignored, damaged water pipes can cost you a huge amount of money.
Since clogging, rusting and mineral deposits occur through time, you have to keep your system clean to prevent these problems from happening.
AC Plumbing Construction recommend the use of Bio-Clean rather than using harsh chemicals and commercial cleaners to maintain the plumbing system.
The plunger, referred to as the "plumber's friend", will often clear up the clogged or slow drain. If you do not already own a plunger you can purchase one at your local home improvement store.
You will need to get the most suction as possible.
If you are working on a clogged double sink plug the other sink with a stopper or wet rag. (* plumbing tip put a thin coating of petroleum jelly on the base of the plunger to get a tighter fit and better suction)
Place the plunger over the drain and push down - pull back just a bit without breaking the seal. Do this 10-15 times then pull up quickly. If the water rushes down the drain you're done. If not try the process again.
You can repeat this process several times however, if the clog remains after the first few times it may be time to try something else. If you can locate your trap under the sink, simply remove the clean-out plug and pull the materials causing the problem from the trap.
This will require some tools and some minor working knowledge of plumbing. If you do not have access or do not want to try this on your own call a plumbing professional to assist you or simply try Carlsbad Plumber, AC Plumbing Construction
Homeowners – it is that time of year.
Time to check through your home’s plumbing system.
I know that there are many things on your “honey do” lists and the plumbing maintenance is just one of them.
Though it is not a task you enjoy it is one that should be kept up with throughout the year. Plumbing problems as well as potential problems that should be addressed before they become a real plumbing problem. Carlsbad Plumber
Nothing lasts forever, including the pipes inside your house. Over the decades, the tubing gradually corrodes, rusts, and decays. Unless you replace plumbing, you’re eventually going to get leaks—and possibly a flood of water or raw sewage into your home that causes thousands of dollars in damage to your building and belongings.
But is a plumbing disaster imminent or just a concern for the distant future? Replacing old pipes in a 1,500 square foot, two-bathroom home costs $4,000 to $10,000, and requires cutting open walls and floors, so you certainly don’t want to do the job before it’s necessary. Here’s how to assess your plumbing system and know when it’s time for replacement.
Know Your PipesThe type of plumbing in your house determines how long you can expect it to last. So review the home inspection report you got when you bought your home to see what kind of pipes you have—or bring in a trusted plumber to do a free inspection of your plumbing system.
Your Pipes’ Lifespan
Supply pipes (under constant pressure and therefore most likely to cause water damage when they leak)
Polyvinyl chloride (known as PVC)
If your pipes are older than these guidelines, it doesn’t necessarily mean they need to be replaced. Well-maintained pipes may last longer, and poorly maintained ones or those in areas with hard water (meaning it has high mineral content), may fail sooner, says Passaic, N.J., plumber Joseph Gove, who supplied the lifespan estimates.
So, no matter what kind of pipes you have and how old they are, you need to keep an eye on them.
Related: Plumbing Pipes: Which Is Safest, Easiest, Best?
Spend Oh-So-Wisely on a Kitchen Remodel
Lead pipes, used in the early 1900s, have a life expectancy of 100 years, but they can leach lead into your drinking water, a serious health hazard.
Polybutylene pipes, used from the 1970s through the 1990s, are extremely prone to breakage.
Watch for Signs of TroubleIf your house is more than about 60 years old, make it an annual ritual to look at any exposed pipe—in basements, crawlspaces, and utility rooms—for telltale signs of trouble. Check the tubing for discoloration, stains, dimpling, pimples, or flaking, which are all indications of corrosion. If you find irregularities, bring in a plumber to do an inspection.
You’ll want to keep a watch for leaks too, of course. Even small ones that are easily repaired may be indicators that the time for whole-house replacement is approaching. After all, the original pipes in your home are the same vintage, they’re made of the same material, and they’ve been subjected to the same water supply and usage patterns.
“So if you’ve got sporadic leaks in some places, they’ll start showing up throughout your system soon,” says Philadelphia plumber Joseph Emanuel. “It’s time to change your water lines.”
Also, when you fill your bathtub, look at the color of your water—especially after a vacation when it has been sitting in the pipes for a while. If the water looks brown or yellow, what you’re seeing is rust, a sign of decay inside the pipes. Consider replacement soon.
Related: 8 Smart Tips to Stop Plumbing Leaks
Best Opportunities to Replace PipesUltimately, you’ll need to rely on a trusted plumber to advise you whether it’s time for a pipe replacement. And it’s always good to get a second and even third opinion before you embark on a replacement project. But there are a few ways you can mitigate the cost and hassle of the job.
Replace what’s exposed. For a home with plaster walls, wood paneling, or other features that make it difficult to gain access to in-wall pipes, consider at least replacing pipes that aren’t buried in the walls. Although it’s a big job, replacing exposed pipes in a basement, crawlspace, or utility room is fairly straightforward, because the plumber can easily get at the pipes.
And depending on the configuration of your house, the plumber may be able to access the vast majority of your system this way. For a 1,500 square-foot, two-bathroom home, you’ll pay between $2,000 and $6,000 or more to replace just the exposed plumbing.
Replace when you renovate. Whenever you remodel a portion of your house, take the opportunity to inspect—and if need be, replace—any plumbing lines that you expose when you open up the walls and floors. This includes not only the plumbing in the kitchen or bathroom that you’re remaking, but also any pipes passing through the walls to feed upstairs bathrooms.
Because the pipes are exposed during the project and because the plumber is coming on site anyway, the added cost may be only $250 to $1,000—a bargain, considering you’ve eliminated a hard-to-get-at problem area when you have the chance.
PEX Limits DemolitionIf you have inside-the-wall supply pipes that require replacement, your plumber may be able to limit the wall demolition he needs to do by using an alternative piping product: Cross-linked polyethylene tubing, also known as PEX, is a flexible plastic hose.
It can often be snaked into walls in much the way electricians feed their wires behind the wallboard or plaster with relatively minimal surgery—not an option with rigid copper pipe.
PEX meets building code nearly everywhere, comes with a 25-year warranty, and puts a smaller hit on your budget than copper. Replacing all of the plumbing in a 1,500 square foot, two-bathroom home with copper piping costs between $8,000 and $10,000.
But using PEX would cost just $4,000 to $6,000, according to Gove. That’s because of lower material and labor costs. “If it takes you two days to re-plumb a house with copper, you can do that same house in a day with PEX,” says Emanuel.
Still, some environmental groups worry about as-yet-unknown health risks of plastic water supply lines. And since PEX has only been widely used in the U.S. for about a decade, it doesn’t have enough of a track record to indicate how long it will last—in other words, how long it’ll be before the plumbing has to be replaced again.
If this is a concern to you, consider an alternative pipe material.
Close your hoses
Pipes can burst when water inside expands as it freezes, creating an expensive mess in your home.
What to do:
Shut off inside valves that control water flow to hose spigots. Then briefly open the spigots to drain any leftover water in pipes and hoses. Also drain water from supply lines for water sprinklers and pools, and shut off inside valves that control them. And help prevent freezing by insulating pipes in unheated areas.
What you save:
Thousands of dollars in plumbing repairs and water damage, especially if pipes burst and cause a flood while you’re away.
If your house is drafty and your furnace needs maintenance, you’ll be paying more to keep warm this winter than you have to.
With a little caulk and some elbow grease you can tighten the envelope of your home. Your furnace is less likely to fail on a cold day if you do some quick maintenance now. Carlsbad Plumber.
The smile you have when we leave is what we pride ourselves on.